Sony IMX249 · 2.4MP 1/1.2" global-shutter CMOS image sensor

IMX249 Sensor Specifications & Compatible M12 and C-Mount Lenses

IMX249 image sensor

IMX249 is a Sony 1/1.2-inch global-shutter CMOS image sensor from the Pregius family, a cost-efficient choice for global-shutter machine vision. It runs 1936x1216 (2.4 MP) at 30 fps with 5.86um pixels on a 13.40mm diagonal over LVDS in color or mono. A sensor this size needs C-Mount coverage rather than an M12 Lens, and the table below lists every covering option with its calculated field of view.

IMX249 specifications

IMX249 image sensor specifications
Part numberIMX249
製造元ソニー
FamilyPregius
決議1936×1216 (2.4 MP)
光学フォーマット1/1.2インチ
Active area11.34 × 7.13 mm
Sensor diagonal13.4 mm
ピクセルサイズ5.86 µm
シャッターグローバル
最大フレームレート30 fps
インターフェースLVDS
Color / monoColor / Mono

Manufacturer datasheet: Sony IMX249 product page

Lens selection for the IMX249 with calculated field of view

Each field of view below is calculated for the IMX249 active area (11.34 × 7.13 mm) from Commonlands’ per-lens field-of-view data, which reflects each lens’s real distortion rather than a focal-length-only estimate. Alongside the horizontal, vertical, and diagonal field of view, each row lists focal length, mount, aperture (F#), and coverage. Follow the product links for distortion, ingress protection, dimensions, and resolution specifications. Coverage compares the lens image circle with the 13.4 mm sensor diagonal. Entries marked Circular image do not cover the full diagonal; part of the sensor lies outside the image circle. Run working-distance and object-size numbers through the field of view calculator.

Engineering picks for the IMX249

  1. Best ~30° HFoV: 25mm C-Mount Lens (CIL554) (25 mm, f/2.6). Why: the closest covering option to 30° horizontal, chosen for tight inspection framing and long read ranges. Field of view on the IMX249: 25.6° H × 16.2° V (30° diagonal). The image circle covers the full sensor (rectilinear estimate, computed 2026-07-02).
  2. Best ~60° HFoV: 8.5mm C-Mount Lens (CIL508) (8.5 mm, f/2.4). Why: the closest covering option to 60° horizontal, chosen for general-purpose machine-vision framing. Field of view on the IMX249: 67.4° H × 45.5° V (76.5° diagonal). The image circle covers the full sensor (rectilinear estimate, computed 2026-07-02).
  3. Best low light: 4.9mm C-Mount Lens (CIL505) (4.9 mm, f/2.2). Why: the fastest covering aperture (f/2.2), which collects the most light per pixel. Field of view on the IMX249: 98.3° H × 72.1° V (107.6° diagonal). The image circle covers the full sensor (rectilinear estimate, computed 2026-07-02).

This larger format pairs with the C-Mount Lens collection. Covering lenses below run from 4.9 mm to 75 mm focal length and span 8.6° to 98.3° horizontal field of view on the IMX249 active area.

Commonlands LensFocal LengthマウントF#Horizontal FoVVertical FoVDiagonal FoVCoverage
4.9mm C-Mount Lens (CIL505)4.9 mmCマウントf/2.298.3°72.1°107.6°Covers
8.5mm C-Mount Lens (CIL508)8.5 mmCマウントf/2.467.4°45.5°76.5°Covers
12mm C-Mount Lens (CIL552)12 mmCマウントf/2.850.6°33.1°58.4°Covers
16mm C-Mount Lens (CIL553)16 mmCマウントf/2.839°25.1°45.4°Covers
25mm C-Mount Lens (CIL554)25 mmCマウントf/2.625.6°16.2°30°Covers
35mm C-Mount Lens (CIL555)35 mmCマウントf/2.618.4°11.6°21.7°Covers
50mm C-Mount Lens (CIL556)50 mmCマウントf/2.812.9°8.2°15.3°Covers
75mm C-Mount Lens (CIL557)75 mmCマウントf/38.6°5.4°10.2°Covers

Covers in the table means the lens image circle is at least as large as the 13.4 mm sensor diagonal. Confirm corner illumination and MTF at your aperture, wavelength, and working distance. A complete circular fisheye image fits inside the sensor only when its diameter is no larger than the sensor's short side. Need a focal length or coverage that is not listed here? Ask our engineers to confirm a match.

How to choose a lens for the IMX249

Start from the field of view and working distance your application needs. Confirm that the lens image circle covers the active sensor diagonal and that the mount provides the required focus travel and rear clearance. A lens megapixel rating alone does not establish resolution on this sensor. Compare measured MTF at the spatial frequencies your task needs, at the intended aperture, wavelength, distance, and field position, accounting for the 5.86 µm pixel pitch. Estimate framing with the Commonlands field of view calculator.

Sourcing a camera module around the IMX249? Commonlands manufactures M12 lenses and C-mount lenses and ships from San Diego, with same-day shipping on in-stock lenses ordered before 12 PM PST. We also design and build custom MIPI CSI-2 camera modules that integrate the lens, the IMX249 sensor, and the carrier board, available from 1,000 units per year, and assemble consigned IMX249 boards with Commonlands lenses in our San Diego ISO 6 cleanroom from 100 to 100,000 units per year. Talk to an applications engineer.

IMX249 lens and camera module FAQ

What lens fits the IMX249 sensor?

A lens match requires sufficient image-circle coverage, suitable MTF, and mechanical clearance. Use the coverage column and calculated field of view to shortlist lenses, then verify the operating conditions on each product page.

What is the IMX249 sensor size?

The IMX249 is a 1/1.2" format sensor with a 11.34 × 7.13 mm active area and a 13.4 mm diagonal, built on 5.86 µm pixels at 1936x1216 resolution.

Does Commonlands build a custom MIPI camera module for the IMX249?

Yes. Commonlands designs and builds custom MIPI CSI-2 camera modules that integrate the lens, the IMX249 sensor, and the carrier board, available from 1,000 units per year with active lens-to-sensor alignment and 100% MTF testing. Consigned assembly of your IMX249 boards with Commonlands lenses runs from 100 to 100,000 units per year in our San Diego ISO 6 cleanroom. Talk to an applications engineer to scope a module.

Match a lens to your IMX249 camera

Get an engineer-verified lens recommendation for your sensor, format, and field of view.

Contact Commonlands engineering